| |
|
|
 |
|
| DataTraX (DTX) is the most accurate steering system available. The future of HDD depends on accuracy. Contractors must know where their drill bit is located and where it is headed. When the line is installed, the owner must know where it is. |
|
| DTX is a complete system, from planning to as-built drawings, with all directional data documented and recorded. No other system can match these features; |
| |
| • |
Most accurate tool |
| • |
Most accurate steering software |
| • |
Unequalled documentation & reports |
| • |
GIS compatible |
| • |
Flexible job set up options |
| • |
100% intersect success |
| • |
Pressure tool compatible |
| • |
No ridiculous footage fees |
|
|
| |
Horizontal Technology's DTX steering system offers the user a wide range of flexibility. Set the job up to the degree of accuracy needed. The system has been used to hit a 1' target at 190' deep, intersect oncoming bores or drill between existing lines. When precise accuracy is less an issue the job can be set up with a single wire stretched over the entire length of the bore. In either case the accuracy exceeds that of other systems. |
|
|
| |
When set up properly the DTX system can often exceed, plus or minus 1% of the depth. No other system claims this capability. The recorded data can be converted to auto-cad and is GIS compatible. Perhaps the best feature is that there are no footage fees, saving the contractor many thousands of dollars annually! |
|
|
