|
|
|
 |
|
|
The Horizontal Technology adjustable bend housing allows for
quick and easy bend angle adjustment from 0
to 3 . Below is the procedure for setting the Horizontal Technology adjustable bend housing.
Refer to the Figure 1 for step 1 and 2:
| 1 |
Place the jaws of tongs in the tong
areas shown and break the tool joint. |
|
| 2 |
While keeping the adjusting ring teeth
engaged with the mated slots in the
housing two to four complete turns in
the clockwise direction(unthread). |
|
 |
|
|
 |
Refer to the figure 2 for steps 3 and 4:
| 3 |
Slide the adjusting ring down to
disengage the teeth in the ring and
the offset housing. |
|
| 4 |
To adjust the bend angle of the
bent housing, rotate the adjusting
ring clockwise until the desired
bend-angle marking matches the
bend-angle making on the offset
housing. |
|
|
|
